Fisher & Paykel DE4060M, Инструкции по установке и Руководство пользователя

Страница: 14 / 40

12
INSTALLATION INSTRUCTIONS
555 mm
835 mm
Mounting dryer on wall
1
Determine the position of
the dryer on the wall and
mark the bracket position.
A minimum of 50 mm is
needed between the top
of the dryer and the ceiling
for ease of installation. If
mounting above a washing
machine, allow sufficient
room to open the lid of the
washer. Refer to page 11 for
lid clearances.
2
Fix the wall hanging brackets
to the wall securely, eg into
the stud. If the studs are too
far apart, fit a timber slat to
the studs and then mount
the brackets onto the slat.
Add the same slat under the
two spacers. The distance
between the centre of each
bracket is 555 mm (
A
).
3
To install the hooks onto
the dryer, remove one screw
from each side (
B
), reuse
these with two more (each
side) from the kit to fasten
the hooks in place.
4
Remove plastic plugs from
the back of the dryer and
screw the spacers provided
in place (
C ).
5
With assistance, mount the
dryer on the wall brackets.
6
Fit inverted control panel
over the existing panel.
555 mm
From c
entr
e
of t
op hole
From
bott
om
of dry
er
C
B
A