
How to Refill Rinse Aid
1. Turn the plug anticlockwise and remove.
2. Pour rinse aid into the circular opening, taking care not to spill any into
the drawer.
3. Refit the plug, then turn it clockwise back to its original position.
• Any accidental spillages of rinse aid must be
wiped up. If not wiped up, spilt rinse aid will
cause excessive foaming, which may result in
a service call that will not be covered by
warranty.
• Make sure that the plug is closed tight, with its
hand grip in a vertical position.
Remove the Plug
Pour Rinse Aid into the Circular
opening
How Much Rinse Aid to Use
You may need to adjust the amount of rinse aid dispensed in each wash to
suit your water conditions. The lowest setting is ‘0 (off)’, the highest is ‘5’.
See the ‘Preference options’ for instructions on how to change the rinse aid
setting.
• If there is excessive foam at the end of the wash, reduce the setting.
• If dishes are wet or streaky after drying, increase the setting.
• If you live in a hard water area and you have no water softener installed
in your water supply or built into your dishwasher, we recommend
adjusting the rinse aid setting to 5.
Refit the plug by turning it
clockwise. Ensure it is closed
tight.
https://producthelp.fisherpaykel.com/au/Clean/DishDrawer%E2%84%A2/Integrated_Double/DD60DI9/User_Guide_DD60DI9/03_Operating_Instructions
Updated: Wed, 13 Mar 2019 03:46:11 GMT
Powered by
23