Fisher & Paykel DCS WOSU30 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 8

Fisher & Paykel DCS WOSU30 Скачать руководство пользователя страница 4

6

p

j

1

1

2

1

1

1

2

2

4

3

Shelf tag

Guard rail

Sliding frame

(push fully

into place)

SECURE THE OVEN TO THE CABINETRY AND REFIT THE DOOR(S)

A

B

Take care not to

damage the lower trim

of the oven

Ensure supplied spacer

is fitted between oven

and cabinetry

Make sure the appliance is level and securely fitted to the cabinetry and both
oven doors open and close freely.
Make sure all the internal packaging has been removed from the oven cavity.
Make sure all oven vents and openings are clear and are free of any
obstruction/damage.

Important!

Failure to make sure all oven vents are unobstructed may result in poor product performance.

Turn the power to the oven on. The clock should light up and flash 12:00pm.
Set the clock to the current time.
Turn the oven function knob to ‘Bake’ and the oven temperature knob to
350

o

F. Air should blow out of the vent at the bottom of the oven. Inside the

oven cavity, all three oven lights should come on. After five minutes, open the
oven door and the air inside should feel warm and the top element should be
glowing red.
Turn both the oven function knob and oven temperature knob back to OFF
and repeat for the other oven if the appliance is a double model.

8 TROUBLESHOOTING

  If the appliance is not functioning correctly after installation, check the
following:

  Check that the circuit breaker has not tripped or the fuse blown.
  Make sure that the electrical connections have been correctly made.
  Make sure that power is being supplied to the oven.
  Make sure the voltage is correct across all phases.
  If a problem occurs, consult the Troubleshooting section of the User Guide.
  If after checking these points you still need assistance or parts, please refer to
  the Service & Warranty book for warranty details and your nearest Authorized
  Service Center, or contact us through our local website, listed below.

7 FINAL CHECKLIST

www.dcsappliances.com 599990A US CA 02.10

(2,2) -1- 599990A DCSWOU130&WOUD230install A2 USCA.indd 12/2/10 11:00:52 AM

(2,2) -1- 599990A DCSWOU130&WOUD230install A2 USCA.indd 12/2/10 11:00:52 AM

«
...
2
3
4
5
6
...
»

Содержание DCS WOSU30









Отзывы:

Нет отзывов