18
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
The burner won't light
when the ignition is
pushed
There is no gas flowing to the unit.
Check gas supply and connections.
Ensure no air is trapped in line.
There is a something blocking the
air or gas flow.
Check all openings for blockages.
Burner flame is yellow or
orange in conjunction with
the odor of gas.
Dirt or dust may be present in the
area.
Move to a less dusty area and
check for obstructions.
incorrect gas supply or type.
Confirm gas supply and type.
Lo heat with dial in the HI
position.
Fuel hose may be bent or kinked.
Check hose is routed correctly.
Burner may need cleaning.
Follow cleaning instructions.
If using LP gas, supply may be low
or empty.
Check supply, refill tank if needed.
Dial halos don’t illuminate.
Power supply is off.
GFI has tripped (Ground Fault
Interrupter).
Check that the unit is connected
to a live AC power source.
Check GFI outlet, reset if tripped.
Check power supply fuse, replace
if blown.
Burner power too high in
the
LOW
position
Low flame setting has been
incorrectly set.
Refer to 'Low flame adjustment' for
details.
Содержание DCS GDSBE1
Страница 1: ...USER GUIDE US CA DOUBLE SIDE BURNER GRIDDLE GDSBE1 models...
Страница 4: ......