8
PLUMBING & ELECTRICAL CONSIDERATIONS
Hose and cord lengths
z
Your services can be installed to
either
the left-hand or right-hand side
of the product in an adjacent cabinet. Refer to 'Cabinetry preparation'
for service access requirements.
z
The drain hose should not extend more than 4m. A longer drain hose will
cause reduced performance.
Water connection
z
The dishwasher should not be connected to a water system where there
is no temperature control, unless the system is fitted with a suitable
tempering valve.
z
The dishwasher must not be connected to an undersink high-pressure
push-through hot water system, as damage to the system will result.
z
Maximum water temperature: 60°C
z
3/4 BSP connector water inlet hose
z
Ensure water connection complies with local plumbing regulations.
Water pressure
z
0.03-1MPa
Electrical requirements
z
230V, 50Hz, 10A
Anti-flood protection
z
This dishwasher has anti-flood protection, which will stop the water
flowing in the event of a leak within the machine.
SERVICE DIMENSION
LEFT SIDE
RIGHT SIDE
MM
MM
A
Length of drain hose
1650
1300
B
Length of power cord*
950
1450
C
Length of inlet hose
1450
1300
D
Distance from floor to top of hose support
750 – 883
750 – 883
E
Minimum distance from floor to end of drain hoses**
500
500
F
Minimum inlet hose radius
200
200
*excluding plug
**standpipe install illustrated. Distance is the same for all plumbing installs.
a
b
c
a
b c
f
f
e
e
d
d
