Fisher & Paykel Contemporary DW24UNT2X2 Скачать руководство пользователя страница 3

3

SAFETY AND WARNINGS

 WARNING!

Electric Shock Hazard 

Failure to follow this advice may result in 

electrical shock or death.

•  This appliance must be earthed. This appliance 

requires a cord with an equipment-earthing 

conductor and an earthing plug. The plug must 

be plugged into an appropriate outlet that is 

installed and earthed in accordance with all 

local regulations. 

• 

WARNING –

 Improper connection of the 

equipment-earthing conductor can result in a 

risk of electric shock. Check with a qualified 

electrician or service technician if you are unsure 

if the appliance is properly earthed.

•  Do not modify the power supply plug. If a 

different outlet is required have it installed by 

a qualified electrician. Do not use an extension 

cord, adapter plug or multi-box.

 WARNING!

Cut Hazard

Failure to use caution could result in injury.

•  Take care – panel edges are sharp.

 WARNING!

420-630 lb

190-285 kg

Weight Hazard

Failure to follow this advice may result in 

damage or personal injury.

•  Do not attempt to lift this product unassisted.

Содержание Contemporary DW24UNT2X2



















Отзывы: