Fisher & Paykel CG604DW, Инструкция по установке и руководство пользователя

Страница: 25 / 60

23
EN
Care and cleaning
What?
How often?
How? Important!
Burner
parts, pan
supports,
wok stand
As needed,
but at least
once a month
1
Remove the parts that you wish to clean.
See the Figs. following for illustrations of
removable burner parts.
2
Soak stubborn stains in a solution of
biological clothes washing detergent.
3
Clean the parts in hot soapy water. Use
a stiff nylon brush or straight-ended
paper clip to clear the notches of a flame
spreader.
4
Rinse in warm water.
5
Dry thoroughly.
6
Replace the parts correctly, following
Figs. 14-18.
These parts are also dishwasher safe.
Make sure you keep the
notches of the flame spreaders
clear. Soiling may clog these
and cause problems.
Before replacing the burner
parts, make sure that they are
completely dry. Wet burner
parts may result in an irregular
flame. Before lighting a burner
you have reassembled, check
that all of its parts have been
positioned correctly. Incorrect
assembly can cause dangerous
irregular flames and ignition
problems.
Ignitor and
probe
At least once
a month
Clean these very carefully using a toothbrush
and methylated spirits (see Fig. 9). The ignitor ensures trouble-free
sparking and the probe ensures
that the safety valves operate
correctly. Check the ignitor and
probe regularly to make sure
they are clean.
Note: only models with flame
failure protection have probes.
All gas
components
of the
cooktop
Once every
3-4
years
Contact your local Authorised Repairer
to perform a thorough check on all gas
components on the cooktop.
For Authorised Repairer details, see
your Service & warranty book or contact
Customer Care.
All checking and maintenance
must be performed by a
suitably qualified person.
If the gas is connected with a
flexible hose, checking should
include inspecting the entire
length of the flexible hose
assembly for any sign of wear
or damage.