Fisher & Paykel B60SC8DEPX2 Скачать руководство пользователя страница 7

Страница: 7 / 63

SERVICE REQUIREMENTS

1.1 Health & Safety

Note:

When servicing the wall oven, Health and Safety issues must be considered at all times. Specifi c safety

issues are listed below with their appropriate icon. These are illustrated throughout the service
information to remind service people of the Health and Safety issues.

1.1.1 Electrical Safety

Ensure the mains power has been disconnected before servicing the wall oven. If the

supply is required to be on to service the oven, make sure it is turned off when

removing any electrical component or connection to avoid electrical shock.

1.1.2 Electrostatic Discharge

An anti-static strap is to be used as electrical static discharge (ESD) protection when

servicing electronic components.

1.1.3 Good Working Practices

Ensure the work area is in a tidy and orderly condition at all times so as not to cause a

hazard while service work is being completed. Always clean and tidy the oven and work

after service is completed.

1.1.4 Insulation Test

Megger test to check insulation.

Warning: Short together the phase and neutral pins on the plug so as not to damage any

electronic circuitry.

1.1.5 Sheet Metal Edges

When working around cut sheet metal edges use appropriate gloves or protection to

eliminate the chance of receiving a laceration.

1.2 Specialised Tools

For servicing this product, specialised tools are required.

1.2.1 Static Strap

To be used as ESD (electrostatic discharge) protection when replacing or handling

electronic components.

Содержание B60SC8DEPX2
































































Результаты поиска

Содержание B60SC8DEPX2

Отзывы:

Бренды по названию

Популярные бренды

Fisher & Paykel B60SC8DEPX2, Руководство по обслуживанию

Результаты поиска

Содержание B60SC8DEPX2

Отзывы:

Бренды по названию

Популярные бренды