17
IMPORTANT!
●
Ensure your appliance is not exposed to any heat generating appliance eg cooktop,
oven or dishwasher.
●
The appliance has front and rear rollers for moving the appliance forward and backward.
Do not move the appliance sideways to avoid damaging the rollers or the floor
covering / surface.
●
The appliance must be installed by a qualified installer, or Fisher & Paykel trained and
supported service technician to avoid faulty electrical connection and water leaks.
●
All connections for water, electrical power and grounding must comply with local codes
and ordinances and be made by licensed personnel when required.
●
Avoid installation of the appliance/s under a ground fault circuit interrupter (GFCI).
●
Ensure the appliance is installed properly. Improper installation that results in appliance
failure is not covered under the appliance warranty.
Check installation location
1
Check the cabinetry
– Check the dimensions — height, width, depth, floor level, finished
alcove returns.
– Ensure that the ventilation openings in the cabinetry are clear
of obstruction.
– For integrated installation, a finished return of solid material is
required across the top and sides of the new or existing alcove.
– It is recommended that the return should be at least 89mm
deep across the sides.
– Refer to ‘Cavity Dimensions’ prior to installation of the appliance.
2
Check the power supply
– Ensure that there is a separate power outlet for the appliance.
– Avoid sharing the power point with other appliances to prevent the
appliance from accidentally switching off.
– For power requirements, refer to the information on the serial plate.
This is located at the front right-hand side of the drawer when open.
– Ensure your appliance is properly grounded (earthed).
– Connect the appliance to the electrical supply (230VAC, 50Hz) with
fitted plug and lead.
– We recommend to use an isolating switch that is easily accessible
to the user after the appliance is installed.
– Follow the National Electrical Code and all local codes and ordinances
when installing this appliance.
3
Check the water supply
– Ensure that there is a separate water supply connection for the
appliance.
– Your appliance must be installed by a qualified appliance installer as
incorrect plumbing can lead to water leaks.
– Fisher & Paykel is not liable for damage (including water damage)
caused by faulty installation or plumbing
!2
BEFORE INSTALLATION
