16
!2
CONNECT TO WATER AND ELECTRICAL SUPPLY
IMPORTANT!
●
●
The water connection instructions below are intended only for the professional installer.
●
●
Water fittings are not included in the refrigerator and must be purchased separately.
●
●
Fisher & Paykel water fittings are available (part number: 841301) and comply with local regulations.
●
●
Ensure the refrigerator is NOT plugged into a power supply.
●
●
Ensure there is enough tubing for the water connection and to pull the refrigerator out for service, if required.
REAR VIEW
2
At the front of the product, dislodge the PRV.
Grasp the PRV from the clips by pulling it towards you (
A
).
FRONT VIEW
A
3
Firmly insert water tubing into the PRV. The tube should push in at least
5/8” (16mm) before reaching the stop. Once inserted, pull gently on tubing
to ensure it is locked in (
B
).
Secure the connection by attaching the locking key in between the
PRV and water tubing (
C
). Mount the PRV back into the clip.
C
B
1
Uncoil the 1/4” (6mm) water tubing and thread one end through
the opening in the rear cover until it exits the front.
