14
INSTALLATION INSTRUCTIONS
Connecting your water filter (Ice & Water and Automatic Ice models)
Refer to page 25 ‘Installing your new water filter’ of this User guide for details of how to
install your water filter for the first time.
Connecting water (Water dispensing and Automatic Ice models)
1
Ensure the refrigerator is NOT plugged into a power supply. Locate isolation tap for
water connection – cold water supply only. (Tee and tap fitting not supplied).
2
Uncoil the tubing from the back of the
refrigerator. Firmly insert tubing to tap
connection. The tube should push in at
least 16mm before reaching the stop.
Pull gently on tubing to ensure it is
locked in place (refer to
A
).
3
Secure connection by attaching
the locking key in between the tap
connection and locking collet
(refer to
B
).
4
Fasten the tap connection to the cold
water supply tap. Take care not to over-
tighten the tap connection (refer to
C
).
Note: The tap connection supplied
should fit most installation situations.
5
Turn isolating tap on and check that all
connections are dry and free of drips.
Pull gently on tubing to
ensure it is locked in.
A
2
3
4
C
B
