button will flash, and the washer will beep at regular intervals to remind you to remove your load. To remove the
load during this phase, simply press the
button.
Eco/Eco Rinse
Use the ‘Eco’/’Eco Rinse’ option to save water and energy. Selecting ‘Eco’/’Eco Rinse’ will reduce the wash
temperature slightly and alter the wash and rinse programming.
This option will not be available if ‘Pre Wash’ has been selected.
• If you wish to, you can select both the ‘Pre Wash’ and ‘Rinse+’ ‘Wash Boost’ options to perform on the same
cycle. Likewise, you can select ‘Eco’/’Eco Rinse’ and ‘Wrinkle Free’ to perform on the same cycle. Touch the
appropriate button until both options are selected. Repeat to deselect an option.
• For clothes care and performance reasons not all options may be available on some cycles.
Add a Garment (WH8560F, WH8060F, WH8560P, WH8060P and WH7560P models only)
The ‘Add a Garment’ option enables you to add or remove items during the wash stage of the cycle, under certain
conditions. Once the ‘Add a Garment’ button is touched, the
button and time to go will flash. Wait until you hear the door unlock. Open the door and add or remove items.
Close the door and touch
to restart the cycle. The ‘Add a Garment’ button will only operate during the wash part of the cycle and when the
temperature selected is lower than 60°C. ‘Add a Garment’ can be used when the total wash volume has been
reached, as your washer will drain the water to a lower level if necessary, so the door can be opened.
Keylock
This option enables you to deactivate the buttons on the display panel, except for the ‘Power’ and ‘Keylock’
buttons. This prevents accidental button presses.
To turn Keylock mode ON or OFF when the washer is powered on:
• Touch and hold the
Updated: Tue, 16 Nov 2021 12:04:20 GMT
Powered by
4