FB22150
Jeep® JT Gladiator
Tackle Rack
2
2215000
5)
ADJUST SUPPORT BRACES
Slide the braces around to your liking and tighten
them down using a 19mm socket.
6)
INSTALL BED CHANNEL MOUNT BRACKETS
Begin securing the rack to the bed by inserting two
50mm bolts into the included channel brackets as
shown. Rotate it behind the arch bracket and push
it high up against the plastic. With a 19mm socket,
tighten down a nut and washer while ensuring it
clamps onto the bed. Repeat for the remaining 5
brackets.
7)
ACCESSORY MOUNTS
Using the 4 60mm bolts, washers, and nuts, secure
the hardware into the accessory mounts for future
use.
NOTE: If your vehicle comes with the Trail Rail, you
will need to insert the included T Nuts, lining them
up with each bracket.
Use the included Hex bolts, lock washers, flat
washers, and thread locker and secure the Bed
Rack down into the T Nuts.
ENJOY YOUR NEW FISHBONE OFFROAD JT BED
RACK!
