FISCHER ME50 R Series, Руководство по эксплуатации

Страница: 22 / 28

5 | Technical Data FISCHER Mess- und Regeltechnik GmbH
22/28 BA_EN_ME50_ATEX
5.7.2 Process connection
The process connection uses a Tri-Clamp connection acc. to DIN 32676. A G½
inch process adapter with a TC flange can be delivered fro this connection.
Process adapter TC clamp DN40-G½ TC clamp 25-40/1-1.5
37
20
3
Ø17.5
Ø50.5
G½
SW27
TC seal
PN80 PN7 PN40
Fig. 13: Dimension drawing process parameters
Planned measures Operating
pressure A B C
TC clamp DN40 light PN7 53.0 84.5 69.0
TC clamp DN40 solid PN40 53.0 90.0 57.0
TC clamp DN40 high pressure PN80 53.5 102 ---
Table 5: TC clamp
5.8 Parameters
The device can be configured on site using the membrane keyboard. The hous-
ing must be opened for this.
Characteristic curve inver-
sion Increasing; decreasing
Attenuation 0 … 200 s
adjustable signal limits
• upper current limit 3.5 … 22.5 mA
• lower current limit 3.5 … 22.5 mA
• Error signal 3.5 … 22.5 mA
Turn down 1:5
Table 6: Parameters