FISCHER FSS 18 V 400 BL, Руководство по эксплуатации

Страница: 15 / 96

15
8. Accessories
Use only genuine fischer accessories.
Use only accessories that fulfil the require-
ments and specifications listed in these
operating instructions. See page 4 - 5.
A Chargers
B Battery packs with different capacity
Only use battery packs with the appropriate
voltage for your power tool.
C Screwdriving bits
D Tool
For complete accessories range,
visit www.fischer-international.com
or look through the catalogue.
9. Repairs
Repairs to electrical tools must be carried
out by qualified electricians ONLY!
If you have fischer electrical tools that require
repairs, please contact your fischer service
centre. For addresses see:
www.fischer-international.com
You can download spare parts lists from
www.fischer-international.com .
10. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of
disused machines, packaging and accessories.
Battery packs must not be disposed of with
regular waste. Return faulty or used battery
packs to your fischer dealer!
Do not allow battery packs to come into
contact with water!
Only for EU countries: Never dispose of
power tools in your household waste!
In accordance with European Guideline
2002/96/EC on used electronic and electric
equipment and its implementation in national
legal systems, used power tools must be
collected separately and handed in for
environmentally compatible recycling. Before
disposal, discharge the battery pack in the
power tool.
Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
11. Technical specifications
Explanatory notes on the specifications
on page 5.
Changes due to technological progress
reserved.
U = Voltage of battery pack
n0 = No-load speed
S = Impactfrequency
H = Machine tool attachment
m = Weight (with smallest battery pack)
Mmax. = max. tightening torque
Measured values determined in conformity
with EN 60745.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C).
Permitted ambient temperature during storage:
0 °C to 30 °C.
Direct current
The technical specifications quoted are
subject to tolerances (in compliance with the
relevant valid standards).
Emission values
Using these values, you can estimate
the emissions from this power tool and
compare these with the values emitted by
other power tools. The actual values may be
higher or lower, depending on the particular
application and the condition of the tool
or power tool. In estimating the values,
you should also include work breaks and
periods of low use. Based on the estimated
emission values, specify protective meas-
ures for the user - for example, any organi-
sational steps that must be put in place.
Vibration total value (vector sum of three
directions) determined in accordance
with EN 60745:
ah = Vibration emission value
Kh = Uncertainty (vibration)
Typical A-effective perceived sound levels:
Lp
A
= Sound pressure level
L
WA
= Acoustic power level
Kp
A
, K
WA
= Uncertainty (noise level)
Wear ear protectors!
EN