FISCHER Mess- und Regeltechnik GmbH
Assembly | 3
BA_EN_DA03_GKT_HLP_ATEX
15/56
1
2
5
6
3
4
4
Fig. 11:
HAN connector
1
Cable screw connection M20 x 1.5
2
Sleeve housing Han 3A
3
Socket insert Han 7D
4
Pin insert Han 7D
5
Safety clip
6
Attachment casing Han 3D
3.3.2 Contact elements
Contact elements are supplied in accordance with data sheet KE. This illus-
trates all variants, their pin assignment and the technical data.
Magnetic spring contacts
1 2 3 4
1
2
Fig. 12:
Contacts
The terminal numbers always correspond to the contact number an are as-
signed to the target indicators from left to right. Up to three contacts can be
used. There are assigned to the target indicators as follows:
Contact 1: left target indicator
Contact 2: right target indicator.
Inductive contacts
1 2 3 4
- + - +
1
2
E
b
= 5 ... 25V
Fig. 13:
Inductive contacts
In the case of inductive contacts, the switch function is not only determined by
the slot type initiator but also by the switch amplifier. Up to max two contacts
can be used. There are assigned to the target indicators as follows:
Contact 1: left target indicator
Contact 2:right target indicator.
3.3.3 Rotation angle transducers KINAX 3W2
The rotation angle encoder serves to record angular positions, to prepare and
provide the measured values as electrical output signals 0/4 … 20 mA for the
following device. Rotation angle encoder is supplied in accordance with data
sheet KE09. This contains further information about the pin assignment and the
technical data.
1 2 3
R
L
+
-
E
b
= 12 ... 30V
1 2 3
R
L
+
-
~
+
-
~
+
-
2-Wire
3-Wire
Fig. 14:
Rotation angle transducers connection
