FISBA 1006061, Техническая инструкция

Страница: 9 / 17

9
· Connect the USB plug to your laptop and the RS485 plug to the laser module
interface cable
· Connect the power supply to the interface cable
· Connect the interface cable to the laser module connector
· Start the READYBeam software
· Now it is possible to control the lasers via the software
2.2.5 Software interface
The software interface allows a fast start up of the READYBeam with all main
functions.
· Connect power supply
· Connect RS485 interface cable
· Connect the interface cable to the READYBeam
· Switch On +12/+24V Power
· Start software
· Wait 1 minute for temperature stabilization
1. Set Modulation Mode: choose “Digital”
2. Set Power Value 1 (red), Power Value 2 (green) and Power Value 3 (blue):
values in % of the max. laser power
3. Switch the Laser on/off with Digital Enable 1, 2 or 3
4. Enter the command with “ Write Config ” Button
The READYBeam software is provided for download at:
fisba.com/readybeam-software