fisair DFRIGO Series, Руководство пользователя

Страница: 40 / 54

DFRIGO User Manual |
Document subject to change without prior notice.
40
From the previous screen (configuration selection) if you
press you will access the chrono-thermostat screen.
This enables you to program the unit to switch on
automatically at certain times. This function is
activated/deactivated by pressing the vertical cursor keys.
-
Press "OK" to open the value selection.
-
Use the "up" and "down" keys to position the cursor
over the value you want to change.
-
Press "OK" to open the value.
-
Use the "up" and "down" keys to change the value.
-
Press "OK" to validate.
-
Press "ESC" to exit the selection/modification.
-
√=
Enable/disable chrono-thermostat.
-
Day up = start of weekly period.
-
Day down = end of weekly period.
-
Time up = switch-on time.
-
Time down = switch-off time.
From the chrono-thermostat screen, if you press , you
will access this screen.
A password must be entered for this screen to change the
probe if you are going to work in measure signal "M"
configuration.
PASSWORD 07500
Select:
✓
DpT [°C] if you intend to switch on a dew point probe.
✓
RH [%] if you intend to switch on a relative humidity probe.