FIS Thunder Bolt, Руководство по эксплуатации

Страница: 18 / 24

15
Fiber Instrument Sales, Inc. | 1.800.5000.FIS(347) | www.fiberinstrumentsales.com
Thunder Bolt Multi-Tester
Project Mode Operation
Project Mode allows the user to test many fibers in an easy and
quick fashion. The user just needs to set up a file saving matrix, the
parameters and the amount of cables/fibers they have to test. Once
that is set up, just press test for each scan and it will auto-save or ask for
you to verify before saving.
1. Open “Project Mode” application.
2. Select the soft key that represents “New Project”, choose a file
path for your project and name it.
3. Now, use the dial to highlight and select the “Folder” box, this
will be the folder path the individual trace files will be located
in once the project is complete.
4. Then select the “File” box. This will allow you to name the files
that will be included in the project, as well as select unique file
paths (trace info) that will distinguish each trace from the other
such as wavelength, fiber number, and/or cable number all the
while being under the same base file name.
A. For example, after you give a base name to the file (ABC),
before you select “Accept”, select the “Insert Trace Info” soft
key. You will then see a variety of trace information labels.
If you select <Wavelength> 1310nm or 1550nm traces
will be noted in the file name. If you are, for example,
testing a number of fibers and you select <Fiber ID> it will
automatically save and organize your files by wavelength
and the number of each fiber (1,2,3….).
B. Also, if you are testing multiple cables, you can select
<Cable ID> it will differentiate the wavelengths as well
as the traces contained in cable 1 vs. cable 2 (or however
many cables you are testing). Select how many fibers and
how many different cables you are planning on testing
and the unit will automatically populate and organize the
file names.