FIS OSR-CWDM, Руководство пользователя

Страница: 26 / 35

22 OSR-CWDM Users Guide Revision A 1/2019
Section 11 Video Scope Operation
Brightness Icon
Press the menu button, use the left and right buttons to highlight the brightness icon, or touch the brightness
icon to allow adjustment to the brightness level. Use the up and down buttons to adjust the brightness level of the
display or cycle through the brightness levels by pressing the select button.
11.4 Video Scope Operation
To operate the video scope, bring up the menu, highlight the scope icon and press select, or touch the scope icon
on the touch screen. If a probe is not connected already, connect the VIS300 Video Probe to the video probe
port on the top of the unit.
Video Probe Tips
There are a number of video probe tips available. To remove a tip from the probe, grasp the focusing ring and
back the tip retention nut down and pull the tip straight up from the probe. To place a tip on the probe, ensure
the lens is clean, slide the tip on to the end of the probe and tighten the tip retention nut. Do not overtighten the
retention nut.
Viewing/Focusing a Connector
With the video scope turned on and the video probe plugged into the unit, insert a connector into universal tip or
insert the panel adapter tip into the appropriate port. Use the focus ring to get the connector image as sharp as
possible.
NOTE:
To make position adjustments with the LRUD buttons, the unit must NOT be in menu mode.
Menu mode is evident when there is a light blue box positioned around one of the icons. When
the touch screen is used to roughly center the connector image, the menu mode is automatically
turned off.
Tip Retention Nut Focusing Ring
Fig 11.2