Perfect Sleep Chair User Manual
Place the chair on dry, level ground where there is ample room for proper operation. Use the leg levelers to
make small adjustments to ensure the chair is level and completely stable.
Connect any loose wires in the back of the furniture (some models will have wires for a heating pad, massage
motors, headrest/lumbar motors, etc.)
Connect the hand control wand, make sure the wire is routed away from any moving parts or pinch points in the
lift frame or mechanism.
If you discover a problem at any point during setup, stop and contact your authorized retailer immediately. To
avoid product damage or personal injury - do not plug the product into the electrical outlet until the issue is
resolved. Do not attempt to fix any electrical problems by yourself.
Install new 9v batteries (not included) into the battery backup transformer. See figure below.
Connect the transformer to the chair and then directly to a standard wall outlet. Do NOT use an extension cord
with this product. Make sure to place the transformer in an open well ventilated area to avoid damage or
premature failure.
Care and Routine Maintenance
Routine maintenance checks on the fabric and electronics should be performed periodically over the lifetime of
the product.
Inspect the fabric on a regular basis for any discoloration, pulls, tears, or gaps.
Always use the correct cleaning method by consulting the cleaning code for your specific product, the cleaning
code will list authorized cleaning products and method to ensure the product isn’t damaged during this process.
If you are unsure of what cleaning code applies to your product, contact your firstSTREET Customer Service
before cleaning.
This product is intended for indoor use only. Fabric should be kept away from heat sources, out of direct
sunlight, and away from moisture.
Routinely inspect all wiring and connections to ensure they are not damaged in any way. Make sure all
connections are secure and there are no pinched or frayed wires.
Keep all electronics away from moisture and extreme temperatures.
If damage or exposure is discovered at any time during maintenance unplug the product and contact your
authorized retailer.