manualshive.com logo in svg

FirstStreet Docking Station Mark II, Руководство пользователя

Поделиться
Скачать
FirstStreet Docking Station Mark II Скачать руководство пользователя страница 16

 

 

16 

 
 
 
 
 
 
 
 
 
 

 

Seat Adjustments

  

 
The seating on your scooter can be adjusted to various positions for your comfort. The 
service engineer will set these adjustments up for you, but you will be required to adjust it 
yourself, especially when folding the scooter and preparing to transport it into your car. 

 

REMOVE THE IGNITION KEY BEFORE ADJUSTING ANYTHING 

Seat Slider:

 Allows the seat to be adjusted forwards and backwards. Pull the lever 

upwards and adjust the seat to suit. Release the lever and move the seat slightly back and 
forth until you hear the seat lock. Always keep the seat as far forward as possible as this 
aids the stability of the scooter.  

 

IMPORTANT INFORMATION:

 When you are preparing to ‘Load’ the Flyte into your car 

and before starting the seat folding process, you need to make sure the seat is in the rear 
position (farthest from the tiller) to ensure the scooter folds down to its most compact 
position.

 

To adjust the width of the 
armrests, loosen the clamps. 
Adjust the arms in or out to suit 
your requirements, then retighten. 
 

Armrest Removal 

To remove the armrests, 
completely loosen the clamps 
(circled), then pull outwards until 
the armrest is free. If it will not 
separate, loosen the clamp 
further. 

 
IMPORTANT- Check that these 
clamps are tight every day 
before driving the vehicle 

  

Содержание Docking Station Mark II



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды