background image

6

TIME AND CHIME SETTING:

This timepiece plays a Westminster chime melody on the hour and has an  
 automatic shut-off. The clock does not chime between 10:00 pm and 6:00 am.
To ensure that your clock functions correctly, please follow the time and chime 
setting precisely. The clock will chime during the day and will automatically turn 
off at night.
1.   Pull upwards the back panel of the Top Unit.
2.   Before inserting batteries, set the clock at 6:05 am ( 5 minutes past 6:00 ) with 

  

      knob A. See Figure 4.
3.   Insert  1 AA  alkaline battery into the clock battery chamber, according to the  
      positive (+) and negative (-)symbols.
4.   Insert  2 AA alkaline batteries into chime battery chamber, according to the   
      positive (+) and negative (-) Symbols. Make sure the batteries are secure in   
      the holder. The clock will  chime automatically and toll 6 times.
5.   Now turn hands (using knob A) slowly to the present hour in a clockwise  

 

        

      direction. Remember that the clock started at 6:05 in the morning.

 

       

      If setting at night, lets say 9:20 pm, then the hands will be turned thus- 

       

      7,8,9,10,11,12,1,2,3,4,5,6,7,8,9 then 9:20. The last strike you hear 
      will be 9 times.
NOTE:When moving hands to the present time, the clock will begin chiming. Do 
not be concerned about this. The last strike you hear after setting the clock at the 
appointed time will be the correct one.

Figure 4

Содержание 31064











Отзывы: