© 2001 Firstech, Inc. Page 6
Note: (Siren duration is 30 to 60 sec depending on the options set at the time of initial
installation.)
Dual Stage Shock Sensor
Dual Stage Shock Sensor
Press Buttons
(I+III)
for 2 seconds to activate or deactivate the dual stage
shock sensor. The dual stage shock sensor will activate 30 seconds after the
CompuStar alarm mode is armed.
When the dual shock sensor is engaged,
the remote-pager security alerts will be triggered by the following:
Light impact to your vehicle will activate the
first stage shock
sensor
and the car siren will chirp 4 times in addition to the
parking lights flashing 4 times. The remote pager unit will beep
and the hammer icon shows up a couple times
Heavy impact to your vehicle will activate the
second stage
shock sensor
and the car siren will chirp for 30 to 60 seconds and
the parking lights will flash for 30 to 60 seconds. The remote-pager
will be notified audibly and a hammer icon will blink in the
CompuGLO LCD. Press Button
I
for a ½ second to turn off the
second stage shock sensor sirens and flashing lights.
Auto
Auto--Start Function
Start Function
Press Button
II
for 2 seconds to auto-start an automatic transmission engine.
Remember that a manual key in the ignition is required to drive the car. In
addition, the
anti-grind circuit
(this maybe an optional feature provided by
your installer) prevents you from re-cranking the starter on a remote-started
vehicle. Press Button
II
for 2 seconds in order to turn off an auto-started car.
For manual transmission vehicles, please use reservation mode.
The engine will run 15 or 25 minutes (25 or 40 min for diesel) depending on
preset options at the time of installation and then shut off. If your remote-
pager has a problem starting the vehicle, CompuStar will try 2 additional
times. If the engine does not start after the third attempt, please call your
authorized CompuStar dealer.
