User’s Guide Page 4 of 6
•
You released the parking brake while the
engine was running.
•
You entered Valet Mode after the
Reservation Mode has been completed.
Error Messages
If there is a problem in auto-starting your car, you
will hear three chirps when you attempt to auto-start
the car. Wait for 2 seconds and the cause for the
error will be indicated by the number of times the car
chirps and parking lights flash.
Error Number
(# of
times the car parking
lights flash)
Error Reason
1
Engine On
2
Key On
3
Door Open
4
Trunk Open
5
Brake On, Emergency
Brake Released
6
Hood Open
7
Reservation Off (Manual
Transmission Only)
Trunk Release
Press Button
for 2 seconds in order to unlock
and release your trunk door. Note that the trunk
release function will not only release the trunk but
will unlock all the doors as well.
Note: This option must be installed.
Query Function
Query Function allows the owner to visually monitor
the status of your car. Press Button
for a ½
second to activate the Query Function. You will
notice the parking lights flash as follows:
Parking Lights Flash
Arming/Engine Status
Once
Armed, Engine Off
Twice
Disarmed, Engine Off
Three Times
Armed, Engine On
Four Times
Disarmed, Engine On
Panic Mode
Press Button
for 2 seconds to enter Panic Mode.
In this mode, the car will arm if not armed already and
the siren will activate and the parking lights will flash.
In order to disengage Panic Mode, press Button
for ½ second. Then, press Button
for a ½
second to unlock/disarm your vehicle.
If
Anti-Jacking
option has been programmed
(ask your dealer if you like to have this option)
and the Ignition-Kill has been installed , the
Panic Mode works as Anti-Jacking if the car key
in the ignition. In Anti-Jacking mode is
activated while key is in the ignition,
a)Siren will go off for 1.5 minutes, and b)
Ignition-Kill will be activated after the first 30
seconds. That is to give warning to the hijacker
for the first 30 seconds and then to disconnect
the ignition after that to stop the vehicle
Valet Mode
While the vehicle is in valet mode, the only features
that will function will be the keyless entry and optional
auxiliary functions.
In order to enter Valet mode, press Buttons
simultaneously for ½ second.. In order to
manually enter Valet Mode, insert your car key into
the ignition and turn the ignition on and off
(between
ACC and ON)
five times within 10 seconds
You can exit Valet Mode only by pressing Buttons
simultaneously.
Timer Start Mode
In Timer Start Mode, your car automatically starts
every 1.5 or 3.0 hours depending on preset options
during the time of installation for a 24-hour period.
Содержание CompuSTAR 1WPLL4R
Страница 1: ......
