Getting Started
Before First Use
1.
Read and review all safety information and product guidelines.
2.
Inspect all product components for factory defects.
3.
Dispose of product packaging components properly.
Initial Setup
1.
Turn off the Aqua Bed Warmer Controller
2.
Connect the usb cable to the USB connector at the rear of the Aqua Bed Warmer
Controller.
3.
Connect the usb cable to the USB connector at the rear of AB-BLE-550.
4.
Attach the AB-BLE-550 to the back of the Aqua Bed Warmer Controller.
5.
Turn on the Aqua Bed Warmer Controller
