6
2 Way Remote Button Functions
Button
Duration
Additional
Programming
Required
Function / Description
0.5
seconds
no
Lock/Arm and Unlock/Disarm.
I
2.5
seconds
Option 2-11
Run time extender. Resets remote start and turbo run-time while vehicle is remote started.
0.5
seconds
no
Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down).
II
2.5
seconds
no
Activates the remote start. Repeat and remote start will shut off.
0.5
seconds
no
Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down).
2.5
seconds
no
Trunk pop. Triggers the trunk release output and opens the vehicles trunk.
III
double
tap
no
Turns on the CompuGLO backlight (LCD remotes only).
0.5
seconds
no
Car Check (updates vehicle status on remote pager) / Secure Auxiliary / Temperature Display / Vehicle
Voltage Display / Remote Voltage Display
2.5
seconds
no
Locks out button functions to prevent accidental button presses.
IV
4 seconds
no
Panic/vehicle locater (flashes vehicles parking lights and sounds siren and horn).
0.5
seconds
no
Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is triggered).
I + II
2.5
seconds
no
Option programming menu 1. For use during installation.
0.5
seconds
no
Valet mode (see page 5 for details)
I + III
2.5
seconds
no
Turns the shock sensor on/off.
0.5
seconds
Option 1-9
Drive lock. Activates ignition controlled door locks.
I + IV
2.5
seconds
no
Option programming menu 2. For use during installation.
0.5
seconds
no
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
II + III
2.5
seconds
no
Accesses remote option programming (clock, alarm clock, vibrate mode, mute and programmed remote
start timing)
0.5
seconds
Option 2-6
Activates timer start mode. Timer start mode has multiple programmable settings: duration settings,
temperature settings and self start settings.
II + IV
2.5
seconds
no
Initiates parking timer - similar to a stop watch function.
0.5
seconds
Option 2-2
Activates the built-in Turbo timer function. Additional installation is required when using this feature on
automatic transmission vehicles.
III + IV
2.5
seconds
no
Puts the remote in 2nd car mode. 2nd Car mode allows one remote to control two vehicles. Note: The
remote must be programmed to the 2nd Car in order for this feature to be active.
