![Firstcom FC-136 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/firstcom/fc-136/fc-136_manual_2293943004.webp)
03
Battery Pack
CHARGING THE BATTERY PACK
The battery pack is not charged at the factory; charge it before use.
Initially charging the battery pack after purchase or extended storage will not bring the battery pack to its
normal operating capacity. After repeating the charge/discharge cycle two or three times, the capacity will
increase to best status. You should charge or change the battery pack if the battery’s power is weak.
CAUTION:
Use the original battery pack only. It is likely to explode or hurt your body if you use other battery.
Don’t short-circuit the terminals or put it in fire. Don’t attempt to open the unit.
The ambient temperature should be between 0
*
to 40
*
while charging is in progress. Charging beyond this range
may not fully charge the battery.
Always switch OFF the transceiver equipped with a battery pack before charging. Using the transceiver while charging,
it will interfere with correct charging.
Don’t cut off the power or take off the battery during the charging process or else it will interfere with correct charging.
The battery pack life is over when its operating time decreases even though it is fully and correctly charged. Replace
the battery pack.
Don’t recharge the battery pack if it is already fully charged or it will short the life of the battery.
Don’t charge the battery pack or transceiver while it is wet. Please wipe up it first to avoid danger.
04
Charging
Please charge the battery pack as follow
:
Put the DC plug of the transformer into the DC socket of the charger unit.
Connected the supplied transformer to the AC jack
Slide the battery or the transceiver with a battery pack into the charger.
Make sure the battery pack contacts are in contact with the charging terminals, and the charger LED is
on, it begins to charge.
After charging the supplied battery pack for 3 hours, remove it or the transceiver equipped with it from the
charger. The charger light turns to green automatically after charging is completed.
Charging Operation
If the transceiver indicator displays , it means the battery pack is out of power , please charge it.
Please always use the original charger. The charger’s indicator shows the charging status below.
INDICATOR DISPLAY
RED
GREEN
STATUS
CHARGING
COMPLETED
Содержание FC-136
Страница 21: ...37 CTCSS DCS...