7
Care and cleaning
Cleaning the bin and tray:
To clean the ice bin, remove the ice bin from the ice maker and clean with a so cloth
dampened with soapy water. Rinse thoroughly. Dry with a so cloth.
Do not use solvents or
chemicals.
The drip tray should be wiped dry. Water le in this area may leave deposits. To clean the
drip tray, remove the tray from Opal and use a so cloth dampened with mild soapy water to
gently clean the surface. Dry with a so cloth.
Do not use solvents or chemicals.
9.
When the light pulses, drain Opal.
10. Unhook the top of the drain hoses
at the back of the unit. Then lay
them down to drain into a sink or
bucket that is below the level of
the ice maker. Remove the plugs
and allow the water to completely
drain.
11. Once water stops flowing,
re-insert the drain plugs.
12. Add five (5) cups of fresh water to
the water reservoir, and touch the
button. The light ring is divided
into four sections to indicate each
stage. Successive quarters of the
ring will become brighter with
each rinse cycle.
13. Rinse three (3) times with fresh
water.
Repeat steps 7 through 12
three (3) more times, adding fresh
water to the reservoir each time.
(You may continue to repeat the
rinse cycle, for as many times as
you like.)
14. When complete, slide the rear
switch back to “Ice” mode.
