First Water FW-120-M, Руководство по эксплуатации

Страница: 15 / 15

Operation Manual FW-1200-M
© 2012 First Water Systems, Inc pg. 13
6 Troubleshooting
6.1 Pump will not move water
•
Check the 120 volt power source
•
Check the Silt Screen for debris
6.2 Water not flowing from Clean Water Hose
•
Follow troubleshooting steps for “Pump will not move water”
•
Check that downstream valves are open
•
Check power source to Purification Unit
•
Check Silt Screen for excessive debris
•
Check filters
6.3 Water leaks from top of Canisters
•
Check that each Canister O-Ring is in place and lubricated
•
Hand tighten Canister
•
A small, dripping leak is not abnormal
6.4 Water leaks UV Chamber
•
Inspect Quartz Sleeve for damage
•
Inspect Quarts Sleeve O-Rings and Washers (See “Replacing
Quartz Sleeve”)
•
Tighten UV Canister End Cap