First Water FW-120-M, Руководство по эксплуатации

Страница: 11 / 15

Operation Manual FW-1200-M
© 2012 First Water Systems, Inc pg. 9
•
Discard used filters.
•
Rinse and dry all components.
• Leaving Canisters open, allow system to air dry for at least 8
hours, longer if necessary to ensure the unit is completely
dry.
4.4 Preparing for Storage
•
Visually inspect the UV Bulb and Quartz Sleeve.
•
Inspect and lubricate each (3) Canister O-Rings with Silicone
Grease or other food grade lubricant.
•
Place new filters in each Canister and screw the Canisters
back on the unit.
o
Tighten Canisters hand tight only.
•
Coil and store all hoses and accessories.
The FW-120-M should be stored ready for deployment. The
following checklist will ensure that your FW-120-M is properly
stored.

Used filters discarded

New filters installed

Unit clean and dry

Canister O-Rings lubricated and in place

UV Lamp operational

Hoses and Accessories accounted for

Replacement filters re-ordered