3
Start Auto
means to start an automatic pumping operation, just as you would expect if you had
checked
Start on Run
. You can also
Run Pump Program now
.
Pump Tubing
The Kloehn pump is shipped with 1/16” (1.6mm) push-on tubing barbs on both the Kloehn pump
ports and the needle unions. Normally this is used with Tygon tubing, as this tubing is
inexpensive, flexible, and commonly available. However, alternative tubing assemblies are
available. The fittings are ¼-28 threads. Hamilton and Upchurch, to name two well-known
suppliers, offer fittings and tubing using Teflon or PEEK. FTA can also supply these. If you use
a stuffer tubing, such as Teflon or PEEK, you may wish to route the tubing along the front of the
instrument frame and not make the cosmetic loop that the factory makes with Tygon tubing.
Note the black Delrin cable and tubing guides are mounted into the frame slots with M5 screws
and T-nuts and can easily be re-positioned. Tygon tubing is sold by the major chemistry supply
houses (Cole-Parmer, Fisher, VWR, etc.) and their catalogs describe its chemical compatibility.
465 Dinwiddie Street
•
Portsmouth, Virginia 23704
•
1.757.393.1584 Fax: 1.757.393.3708
http://www.firsttenangstroms.com
