1
FANSTAND TIP N ROLL BLEACHER
These instructions are to be use in the assembly of First Team Sports
’
FanStand Tip N Roll bleacher
system. Read and follow the instructions carefully. Assembly should only be performed by skilled
persons with a basic knowledge of mechanics.
REMEMBER: Bleachers can be dangerous. Their
use can result in bodily injury or death. Improper assembly can/will increase the chances of an
accident!
If you have questions about the assembly or use of this bleacher design, contact First Team Sports, Inc.
1-888-884-6677
REQUIRED TOOLS:
Assembly of this bleacher design requires the use of basic tools. The following is a minimum
recommended set of tools required.
1 or more -
3/8” socket wrench(s) & extension driver(s)
1 or more -
1/2” & 9/16” socket(s)
1 or more -
1/2" & 9/16” combination wrench(s)
1 each - Framing Square
1 each - Tape Measure
STEP 1: UNLOAD/UNPACK PRODUCT
Always check for damaged parts as the product is removed from the shipper’s truck. Damage to any
items should be reported to the shipping company before signing for the receipt of the product. It may
be necessary to remove planks from the truck one plank at a time. Additionally, a forklift would be
useful for additional boxes and other heavy packaging (Bleacher Frames, etc.).