First Products UA60T, Руководство оператора и список запчастей

Страница: 15 / 54

First Products UA-60T Operator’s Manual
Operation bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
14
Aeration
With the engine running and the machine fully
lifted:
1.
Ensure the Auto Throttle Handle is lowered
back into position to allow the throttle cable to
be pulled when machine is lowered to ground.
2.
Tow machine to starting point on worksite and
lower using hand-held control switch, Figure 3.
3. Adjust the ground speed accordingly. Slow
down to allow tines to penetrate deeper. The
chain hanging on the left side of the machine is
a visual indicator for depth. If the chain is
touching the turf, full depth is achieved.
4. Press the control switch to lift the machine when
desired.
Operating the Attachments
The UA-60T is equipped to have both a solid roller
and a brush fastened to the frame. Attachments can
be seen in further detail in the parts list portion of
this manual.
The roller is seen is Figure 10. It is made to
primarily float using a slot located on the top
bracket on the frame. When down pressure from
the roller is desired, the top link is adjusted to lower
the roller downward until down pressure is achieved
and the pin is at the top of the slot.
The brush is shown in Figure 11. It is fastened to
the frame in a three-point hitch configuration to
allow smooth floatation. The brush easily locks
into place for transportation by simply lifting the
brush to the top of its range. The brush can be
modified to various widths and configurations to
conform to the user’s needs.
The movement of the rotors on the machine is
dangerous. Contact with rotor shaft can
cause serious injury or death. Do NOT put
hands or feet in the working area of the rotor
shaft while activated.
Figure 10. Roller Attachment
Figure 11. Brush Attachment