First Light Tomahawk GP, Руководство пользователя

Страница: 4 / 9

6
CoMPonenTS
bATTeRY InSTALLATIon
STeP 1. Remove battery cap. Insert two batteries “+” terminals first
(as shown above).
STeP 2. Reinstall battery cap. Hand-tighten until snug.
STeP 3.
Ensure batteries are properly installed by pressing any button on
the control panel. The red LED “lock” should illuminate indicating the
light is in Lockout Mode. If it does not, repeat Steps 1 and 2, ensuring
both “+” terminals are facing up.
BEZEL
LAMP HOUSING
MOLLE-READY
RETENTION
CLIP
FINGER LOOP
BATTERY HOUSING/SLEEVE
BATTERY CAP
CONTROL
PANEL
7
MOMENTARY
CONTROL
LoCkoUT/ReADY MoDe
Lockout Mode prevents accidental illumination.
To unlock the light and enter Ready Mode,
press the Constant-On and
Cycle Control buttons simultaneously
and release. The green “unlock” indicator will
illuminate signaling that visible light modes
are active.
To reenter Lockout Mode at any time during use,
press and hold the Constant-On
and Cycle Control buttons simultaneously for
1 second. The red “lockout” indicator will illuminate.
MoMenTARY MoDe
The Momentary Control button activates the
primary white LED at maximum brightness when
pressed. When released, the white LED turns off.
MOMENTARY
CONTROL
CYCLE CONTROL
CONSTANT-ON
CONTROL
Control Panel Diagram
LOCK (RED/GREEN)
INDICATOR
bASIC FUnCTIonS
CONSTANT-ON
CONTROL
CYCLE CONTROL
LOCK (RED/GREEN)
INDICATOR
(
I/o
I/o