First International Computer AN11, Руководство пользователя

Страница: 6 / 56

1 - 2
AN11 Mainboard Manual
Package Checklist
If you discover any item below was damaged or lost, please contact your
vendor.
þ
The mainboard
þ
This user manual
þ
One FDD cable
þ
One HDD cable
þ
One ATA/100 cable
þ
Two software CDs
(CD Pro, CD Plus)
þ
One USB dual cable
IMPORTANT: AMD CPU HEAT SINK INSTALLATION
Be ware finish heat sink install. Before you boot system, please
check the heat sink is complete contact with die of CPU.
The poor contact will bring about over heat, it may damage your
processor.
It is strongly recommended that at least a 250-watt ATX power pupply
be used for this motherboard. Make sure that your ATX power sup-
ply can supply at least 20 amperes on teh +5-Volt lead and 10mA
on the +5-Volt standby lead (+5VSB). Your system may become
unstable / unreliable and may experience difficulty in powering up if
your power supply is inadequate.
NOTE: CD Pro that contains patch files, onboard video/audio chip
drivers, related online help and other useful information can be
found in your mainboard package.
Please install it right after your Windows operating system installa-
tion is done.Place your CDPro in the drive, an operating menu will
appears in your monitor. Please select
Auto Installation. It will auto-
matically detect which software tools (patch files, drivers) that the
mainboard needs. Press OK button to go through the whole instal-
lation procedure in a very straight forward and easy way. It also
provides you with a custom way to select wanted patch files and
software drivers that for onboard chips use. The top menu of the
CD Pro lists all the functions that allowed by this board.