Trigger Adjustment
The Quest is equipped with a triple adjustable trigger. The firing point, stopping point,
and magnetic return can all be adjusted as follow.
Firing point
– Adjust the firing point by inserting a 1/16” allen wrench into the bottom
trigger adjustment screw seen in the trigger. To shorten the firing point, turn the screw
clockwise. To lengthen the firing point, turn the screw counter-clockwise.
Stopping point
– Adjust the stopping point by inserting a 1/16” allen wrench into the
middle trigger adjustment screw seen in the trigger. To shorten the stopping point, turn
the screw clockwise. To lengthen the stopping point, turn the screw counter-clockwise.
Magnetic return
– Adjust the magnetic return by inserting a 1/16” allen wrench into the
upper trigger adjustment screw seen in the vertical position on the trigger. To diminish
the return, turn the screw clockwise. To strengthen the return, turn the screw counter-
clockwise.
Electronics & Operation
As of March 2006, The Quest paintball marker is equipped with a Wicked Air Sportz Equalizer board. First
Endeavor Paintball, Inc. feels that WAS has a highly successful electronic package thus allowing you, the
customer, the ability to have the best possible product we can offer. Prior to March of 2006, First Endeavor
Paintball, Inc. supplied our own software. If you have an original Quest contact us for the Electronics & Opera-
tion manual for those electronics. We do still plan to supply the original boards as they are upgradeable with
aftermarket chips made by companies such as NOX, and Virtue, where as the Equalizer is not. Please contact
us if you are interested in purchasing this board for use with an aftermarket chip.
The Quest Equalizer
Turning ON and OFF the Equalizer – To turn ON the Equalizer, press and hold the POW
-
ER button (located on the back of the grip frame) for ½ a second, and release it. The LED
will light up yellow and stay that way for several seconds after releasing the button. Tap-
ping the trigger any time the LED is yellow will immediately make the marker active and
ready to fire. After several seconds, the LED will then turn either green (normal mode)
or red (competition mode) to indicate the tournament lock status.
To turn OFF the Equalizer, press and hold the POWER button until the LED becomes
solid red, and then release the button.
Bypassing the Eye System – When the eye system is enabled, the marker will not fire un
-
less there is something in the breech. In order to be able to “dry fire” the marker, the eye
system must be bypassed. To bypass the eye system, press and hold the POWER
button
for ½ a second. The LED will blink yellow, indicating that the eye system has
been bypassed. Repeating this procedure will enable the eye system.
General Usage Tips – The LED boot sequence is as follows: solid yellow (booting), fol
-
lowed by either solid green (normal mode) or solid red (competition mode). If the trig
-
ger is held in the back position while the power is turned on, the LED will light up solid
green. If trigger is further held (5 seconds), the LED light up solid blue to indicate the
board is in maintenance mode™.
5
