First Degree Fluid E820, Руководство пользователя

Страница: 8 / 20

8
Yellow
tank
plug
Filling hose and
funnel
Tank Filling and Water Treatment
Open the rear upper yellow
tank plug and insert hose
into tank (rotating the im-
peller slightly may be necessary to
allow the hose to pass), move the
tank adjuster handle to level 20
and begin filling. Do not fill the
tank higher than the level indicator
on the front of the clear shell. A
properly filled tank holds approxi-
mately 8liters of water.
Warning: Do not under any cir-
cumstances put fingers into the
tank. Use the end of the hose to
move the impeller should the need
arise.
Note: A large bucket is required for filling (Not included)
In areas where tap water quality is known to be poor, FDF recommends the use of distilled
water.
Water Treatment Proce-
dures:
1. Add Chlorine tablet.
2. Wait a minimum of 72
hours. Then add very small
amount of blue dye and
check for desired color. Im-
portant! Do not add blue
dye for at least 72 hours
following Chlorine treat-
ment. The blue dye adds
visual appeal as well as cut-
ting down the amount of light
affecting the tank water, thus
extending the amount of time
between water treatments.
Note: The blue
dye is extremely
concentrated and
will readily stain
carpet or clothing.
Caution:
Use a drop cloth when filling
or adding blue dye
Blue Dye