10
Assembly Instructions
c) Secure right and left handle onto
corresponding crank arms by screw-
ing the handle counter- clockwise
using the 15mm Spanner
[
13
]
d)
Re-assemble the M8 Bolt and M15
Washer onto the handle on each side
using the 6mm Allen Key
[
11
]
NOTE: Handle threads have a blue coating which will feel very tight when threaded
onto crank arm. This is a type of thread locker, which once in contact with
the crank arm will cause threads to activate. Note: Allow 15 minutes for
the thread locker to activate before first time use. Check pedal tightness
periodically thereafter with a 15mm wrench. DO NOT USE IF NOT TIGHT.
15mm Spanner
ATTACH RIGHT AND LEFT HANDLES TO CRANK SHAFT
REQUIRED
1 x Left Handle Kit [3]
1 x Right Handle Kit [4]
2 x M15 Washer
2 x M8x15mm Bolt
6mm Allen Key [11]
15mm Spanner[13]
M8x15 Bolt
M15 Washer
a) Identify the right and left handle shafts. There is a ‘R’ or ‘L’
marked on each handle shaft. NOTE: Improper installation will
result in uneven handle adjustment.
b) Use the 6mm Allen Key to disassemble the M8x15mm Bolt
and M15 Washer on each handle.
