First Degree Fitness POWER CLIM, Руководство пользователя

Страница: 15 / 20

15
Maintenance & Troubleshooting
To ensure maximum lifespan and optimal performance follow these steps:
1. Keep your POWER CLIMB in a dry, clean climate controlled environment at room
temperature.
2. Only treat water with FDF genuine Water Treatment Tablets. Refer to „water
treatment‟ section on page 10.
3. Periodically clean your machine with disinfectant, applied using a lint free cloth.
4. Wipe dust off the machine.
5. For information on how to service your machine visit
firstdegreefitness.com/support
For further information, manuals and warranty requests visit
www.firstdegreefitness.com/support
Problem Solution
Water changer color or becomes
cloudy.
Change rower location to reduce direct
exposure to sunlight. Add water treatment
or change tank water as directed in the
water treatment section of this manual.
Consider using distilled water to refill tank.
I want to drain the fluid tank on my
POWER CUBE.
It is recommended to take your unit
outdoors, open the Orange fill plug, and lay
unit on its back to facilitate draining process.
For simple, fast and efficient filling and/or
drainage of the Fluid Tank, we have a battery
operated pump (rechargeable via USB)
available as an option. We recommend this
to any commercial facility, with multiple
units, that has a need to drain and refill
Tanks from time to time. To purchase,
contact your nearest First Degree Fitness
distributor or go to our website on
www.firstdegreefitness.com for details.
The computer display is erratic and
illuminates, but does not register with
movement.
It is possible that there is a loose connection.
Check that the computer lead is connected
properly to the unit. If connected properly
check sensor gap. Contact your local dealer if
this fails to address the problem.
The computer does not illuminate after
battery installation.
Replace/reinstall batteries in correct position
and try again. If the LCD screen fails to
illuminate, try rotating the batteries slightly
in the computer.
If this fails, contact your local service center.
The Bluetooth Auto-Adjust Monitor
LEVEL is not synchronized with the
tank LEVEL.
Bluetooth Auto-Adjust Monitor LEVEL needs
to be recalibrated. Please refer to
"Calibration Procedure" page 14 of this
manual.