First Degree Fitness E685 FLUID EXERCISE, Руководство пользователя

Страница: 10 / 20

10
Assembly Instructions
NOTE: Handle threads have a blue coating which will feel very tight when threaded
onto crank arm. This is a type of thread locker, which once in contact with
the crank arm will cause threads to activate. Note: Allow 15 minutes for
the thread locker to activate before first time use. Check pedal tightness
periodically thereafter with a 15mm wrench. DO NOT USE IF NOT TIGHT.
Attach Telescoping Tube to the Control Arm
REQUIRED
Multi-Wrench[6]
M8x55 Bolt[15]
3 x M8 Washers [16]
M8 Nyloc Nut [17]
6mm Allen Key [20]
USE CAUTION
WHEN RELEASING
GAS - SPRING KNOB
90 FT - LBS
(122Nm)
a)
Attach the Telescoping Tube to the control arm and secure
with M8x55mm Bolts[15], 3x M8 Spring Washers[16] and
M8 Nyloc Nut[17].
REQUIRED
1 x Right Handle Kit [3]
1 x Left Handle Kit [4]
2 x M8x20 Screw [18]
6mm Allen Key [20]
Crank Tool [22]
a) Identify the Right and Left Handle Shafts. There is a „R‟ or „L‟
marked on each handle shaft. NOTE: Improper installation will
result in uneven handle adjustment.
b) Secure the M8x20 French Screw[18] onto the handle on each
side using the 6mm Allen Key
[
20
]
and Crank Tool [22]
200 FT - LBS
(271Nm)