background image

 

FLUID UPPER BODY ERGO (UB-E620) 

INTERNATIONAL WARRANTY – 

FULL 

COMMERCIAL USE

 

 

This product is designed and constructed for use in any Health Club / Fitness Studio application 

 
First Degree Fitness Limited warrants that the 

Fluid Upper Body Ergometer (models UB-E620)

purchased from an authorised agent and in its undamaged original packaging, is free from defects in 
materials and workmanship.  First Degree Fitness Limited or its agent will, at their discretion, repair or 
replace parts that become defective within the warranty period, subject to the specific inclusions and 
exclusions below. 

 

Metal Frame – 10 Year Limited Warranty 

First Degree Fitness will repair or replace the metal Main Frame should it fail due to any defect in ma-
terials or workmanship within 10 years of the original purchase.  Warranty does not apply to frame 
coating. 

 

Polycarbonate Tank & Seals – 3 Year Limited Warranty 

First Degree Fitness will repair or replace the polycarbonate tank or seals should they fail due to any 
defect in materials or workmanship within 3 years of the original purchase. 

 

Mechanical Components (of a non-wearing nature) – 2 Year Limited Warranty 

First Degree Fitness will repair or replace any mechanical component should it fail due to any defect 
in materials or workmanship within 2 years of the original purchase. 

 

All Other Components (of a wearing nature) – 1 Year Limited Warranty 

First Degree Fitness will repair or replace any component should it fail due to any defect in materials 
or workmanship within 1 year of the original purchase. 

 

Specific Inclusions 

Pedals & toe straps 
Hand grip assemblies 
Seat 
All rubber components  
Computer & speed sensor (excluding replaceable batteries) 
All drive belts & chains 
Crank arms 
All pulleys, rollers & bearings 

 

 

General Exclusions 

Damage to the finish of any part of the machine 
Damage due to neglect, abuse, incorrect assembly or use of the machine 
Any charges for freight or customs clearance associated with the return or dispatch of parts 
Any damage to or loss of goods during transport of any kind 
Any labour cost associated with a warranty claim 

 

General Conditions 



The serial number of the machine must be correctly registered with First Degree Fitness Limited 
or one of its appointed distributors

 



First Degree Fitness Limited reserve the right to examine any part where replacement is claimed 
under warranty

 



Warranty commences at time of sale but no later than six (6) months from date of original ship-

ment

 



Warranty period applies only to the original purchaser from the date of purchase and is not trans-
ferable

 



The product must be returned to your place of purchase in original packaging with transportation, 
insurance and associated charges paid for by you and risk of loss or damage assumed by you

 



First Degree Fitness makes no other warranties except as stated here and expressly disclaims all 
warranties not stated in this warranty.  Neither First Degree Fitness nor its associates shall be re-
sponsible for incidental or consequential damages

 



Manufacturer's warranty automatically commences upon sale of the product to end user or upon 
the expiration of one (1) year from month of manufacture, whichever occurs first

 

Содержание E620 Seated UBE



















Отзывы: