background image

25  

 

APOLLO PRO II / VIKING PRO ROWER 

INTERNATIONAL WARRANTY – 

FULL 

COMMERCIAL USE

  

 

FIRST DEGREE FITNESS Limited warrants that the Apollo PRO II / Viking PRO (model APPRO / 

VIKPRO), purchased from an authorized agent and in its undamaged original packaging, is free from 

defects in materials and workmanship. FIRST DEGREE FITNESS Limited or its agent will, at their 

discretion, repair or replace parts that become defective within the warranty period, subject to the 

specific inclusions and exclusions below. 

 

Metal/Wood Frame – 5 Year Limited Warranty 

FIRST DEGREE FITNESS will repair or replace the Metal / Wooden Main Frame of the Rower should it 

fail due to any defect in materials or workmanship within 5 years of the original purchase. Warranty 

does not apply to frame coating. 

 

Polycarbonate Tank & Seals – 3 Year Limited Warranty 

FIRST DEGREE FITNESS will repair or replace the polycarbonate tank or seals should they fail due to 

any defect in materials or workmanship within 3 years of the original purchase. 

 

Mechanical Components (of a non-wearing nature) – 2 Year Limited Warranty 

FIRST DEGREE FITNESS will repair or replace any mechanical component should it fail due to any 
defect in materials or workmanship within 2 years of the original purchase. 

 

Specific Inclusions 

Seat Frames 

Stainless Steel Impeller Assembly 

 

All Other Components (of a wearing nature) – 1 Year Limited Warranty 

FIRST DEGREE FITNESS will repair or replace any component should it fail due to any defect in 

materials or workmanship within 1 year of the original purchase. 

 

Specific Inclusions 

Bungee Recoil Cord  

Hand Grips & Foot Straps 

Rowing Belt 
Seat and Seat Runners 

All pulleys, rollers & bearings 

All rubber components  

Computer & speed sensor (excluding replaceable batteries) 

Footplates (pivoting & sliding) 

 

General Exclusions 

Damage to the finish of any part of the machine 

Damage due to neglect, abuse, incorrect assembly or use of the machine 

Any charges for freight or customs clearance associated with the return or dispatch of parts 

Any damage to or loss of goods during transport of any kind 
Any labour cost associated with a warranty claim 

 

General Conditions 

 

The serial number of the machine must be correctly registered with FIRST DEGREE FITNESS 
Limited or one of its appointed distributors

 

 

FIRST DEGREE FITNESS Limited reserve the right to examine any part where replacement is 
claimed under warranty

 

 

Warranty period applies only to the original purchaser from the date of purchase and is not 

transferable

 

 

The product must be returned to your place of purchase in original packaging with 
transportation, insurance and associated charges paid for by you and risk of loss or 

damage assumed by you

 

 

FIRST DEGREE FITNESS makes no other warranties except as stated here and expressly 
disclaims all warranties not stated in this warranty. Neither FIRST DEGREE FITNESS nor 

its associates shall be responsible for incidental or consequential damages

 

 

Manufacturer's warranty automatically commences upon sale of the product to end user or 

upon the expiration of one (1) year from month of manufacture, whichever occurs first 

 

Содержание Apollo PRO



























Отзывы: