3
ENGLISH
2
ENGLISH
PARTS DESCRIPTION
(see picture 1)
1. Bread slot
2. Pull out crumb tray
3. Bread carriage lever
4. Defrost function
5. Reheat function
6. Cancel function
7. Light/dark selector (1-7)
8. Bun warmer
IMPORTANT SAFEGUARDS
To reduce the risk of electric shock, fire or injury,
always follow these safety precautions:
1. Read all instructions.
2. Do not touch hot surfaces.
3. To protect against risk of electrical shock, do
not immerse cord, plugs or toaster in water or
other liquid.
4. Close supervision is necessary when any
appliance is used by or near children.
5. Unplug from outlet when not in use and before
cleaning. Allow to cool before handling.
6. Do not operate any appliance with a
damaged cord or plug or after the appliance
malfunctions or when it has been damaged in
any manner. Return appliance to the dealer for
examination, repair or adjustment.
7. Do not use outdoors.
8. Do not place on or near a hot gas or electric
burner or a heated oven.
9. Do not insert oversized foods, metall foil
packages or utensils into a toaster as they may
create a fire or electrical hazards.
10. A fire may occur if the operating toaster is
covered or touching inflammable material
including curtains, draperies, walls etc.
11. Do not clean with metal scouring pads. Pieces
can break off the pad and touch electrical parts,
creating electrical hazards.
12. Do not use the toaster for anything than the
intended use.
13. Do not use any other appliance at the same
time in the same electrical circuit as it may
overload the circuit and blow the tuse or circuit
breaker.
14. This product is not intended for commercial
use.
15. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
16. Children should be supervised to ensure that
they do not play with the appliance.
17. Only connect appliance to alternate current
power supply with voltage as specified on
nameplate (grounding outlet).
18. Appliances are not intended to be operated by
means of an external timer or separate remote-
control system.
USE & CARE
Before first use, make sure all packaging materials
have been removed from the toaster. Check in
toaster slots no packaging materials is left inside.
NOTE: Do not place any bread in toaster during
the first toasting to allow the new elements to
preheat and burn off any dust which may have
accumulated during assembly.
1. Make sure crumb tray is in place and bread
carriage is in the up position.
2. Set up toaster on flat, firm countertop surface
away from the edge and at least 3 inches away
from wall or rear of counter.
3. Unwind power cord and plug power cord into
nearby outlet.
4. Insert slices of bread. Be sure bread carriage
lever is in up position.
5. Turn the light/dark selector to desired position.
The higher the number (1-7) the darker the
toast colour.
6. Press the bread carriage lever down until it
locks into position.
7. When the toasting cycle is completed, the
toast is automatically ejected up. To interrupt
toasting before the toasting cycle has been
complete, simply press the cancel button.
8. After toasting, unplug the toaster from outlet.
TOASTING NOTES
Toasting is a combination of cooking and drying
the bread. Moisture levels differ from one bread to
another, which can result in varying toasting time.
• For slightly dry bread, use a lower light/dark
setting than normal.
• For fresh bread or whole wheat, use a higher
setting than normal.
• Breads with very uneven surfaces (such as
English muffins) will require a high light/dark
setting.
• Thickly cut pieces of bread (including
bagels) will take longer to toast, sometimes
significantly longer, since more moisture must
be evaporated from the bread before toasting
can occur.
• Very thick pieces may require two cycles.
• When toasting raisin or other fruit breads,
remove any loose raisins from the surface of
the bread before placing into the toaster. This
will help prevent pieces from falling into the
toaster or sticking on the guard wire in the slot.
• Before toasting bagels, slice each beagle into
two equal halves.
• Single slice toasting: if you are toasting as
single slice of bread, set the light/dark selector
lighter than normal. The toaster is designed to
heat to whole toasting chamber for two slices.
By reducing the toasting time for a single slice it
will not be over toasted.
• Frozen breads: frozen waffles, pancakes, French
toast and frozen bagels should be warmed
using the defrost button.
• Pastries: exercise caution when toasting
pastries. The filling can become quite hot
long before the surface of the pastry becomes
brown.
DEFROST BUTTON
The defrost button is designed to first defrost and
then toast the bread, which extends the toasting
cycle slightly.
1. Turn the light/dark selector to desired position:
Setting 1-2: refrigerated breads and thinner
frozen items such as frozen pancakes.
Setting 3-4: pastries, frozen waffles, thin French
toast and refrigerated bagels.
Setting 5-7: Thicker frozen items such as bagels,
hand cut bread and thick French toast
2. Press the bread carriage lever down until it
locks into position.
3. When the cycle is complete the bread carriage
will raise up the toast. If you wish to stop the
defrosting before it is finished, simply press the
cancel button.
REHEAT BUTTON
1. Insert slices of bread.
2. Press the bread carriage lever down until it
locks into position.
3. Press the reheat button.
4. When the cycle is complete the bread carriage
will raise the toast up.
5. If you wish to stop the toasting before it is
finished, simply press the cancel button.
Once the bread have been toasted to the preset
color, the carriage handle will automatically pop
up.
CAUTION:
1. Remove all protective wrapping prior to
toasting.
2. If toaster starts to smoke, press Cancel to stop
toasting immediately.
3. Avoid toasting the food with extremely runny
ingredients such as butter.
4. Never attempt to remove bread jammed in the
slots without unplugging the toaster from the
electrical outlet first. Be sure not to damage the
internal mechanism or heating elements when
removing bread.
5. The bread slot is only applicable for toasting
regular bread slice.
CLEANING THE TOASTER
Always disconnect the toaster from the outlet and
allow to cool.
The Crumb Tray should be cleaned often to avoid
build up of crumbs.
How to clean the Crumb Tray:
1. Unplug the toaster from the wall outlet and
allow to cool.
2. Hold the toaster upright over a waste bin. Slide
out the Crumb Tray and empty.
3. Wipe the tray with a slightly damp cloth. To
remove stubborn spots, use a nylon or plastic
scouring pad dampened in soapy water and
squeezed nearly dry.
4. Dry the Crumb Tray thoroughly before sliding
back into position. Ensure that the tray is fully
slotted back into place before operating the
toaster.
IMPORTANT: When cleaning outside surfaces, do
not use a scouring metal pad or abrasive material
to clean toaster as scratching may occur.
CAUTION: Never immerse toaster in water or any
liquid.
SPECIFICATIONS:
220-240 V • 50/60 Hz • 900-1050 W
Environment friendly disposal:
You can
help protect the environment! Please
remember to respect the local regulations:
hand in the non-working electrical equipments to
an appropriate waste disposal center.
