E-11
MESSAGE FOR EMERGENCY CALLS
RECORDING YOUR EMERGENCY MESSAGE
1.
Press MENU BUTTON repeatedly (or press MENU then
buttons) until “RECORD MESSAGE”
is shown.
2.
Press and hold the DIAL BUTTON until you hear a beep and “VOICE” icon flashes in the LCD Display; then
speak into the SPEAKERPHONE MIC simultaneously. The maximum recording time of the Emergency
Message is 20 seconds.
3.
Release the DIAL BUTTON when you have finished recording. The phone then playbacks the recorded
message automatically.
4.
Repeat steps #2 to #3 if you want to record the Emergency Message again.
5.
Press
BUTTON to exit the setup mode.
Note:
When recording a message, remind your caller to press 0 to talk (maximum 3 minutes), and then also to press 1
and 2 (in sequential order) if they want to cancel the S
O
S function and remain on the phone with you.
O
nce your
caller picks up the call, the speakerphone will be activated for 3 minutes. If your caller does not press 1 then 2
within 3 minutes, the telephone will disconnect automatically and dial the next Emergency Number in the phone
book. If the callers do not press 0, they will only be able to listen to your recorded message but they will not be
able to talk to you. You may wish to use this message or create one of your own to meet your specific needs, for
example:
“ This is Mr. Jones. I have a problem, please press 0 to talk and listen in. ”
CHECKING YOUR EMERGENCY MESSAGE
1.
Press MENU BUTTON repeatedly (or press MENU then
buttons) until “CHECK MESSAGE” is shown.
2.
Press DIAL BUTTON to hear the recorded message.
3.
To delete the recording, press DELETE BUTTON
during playback.
4.
If you want to record a new Emergency Message, follow steps #1 to #3 in the
RECORDING YOUR
EMERGENCY MESSAGE
section above.
5.
Press
BUTTON to exit the setup mode.
Cautions:
To ensure proper operation, this telephone must be installed according to the
INSTALLATION
instructions
above. To verify that the telephone is operating properly and can successfully report an alarm, you should
test the telephone immediately after installation, and periodically thereafter.
This telephone cannot report an alarm when some other equipment (telephone, answering system, computer
modem, etc.) is connected to the same phone line and is in use.
Save phone numbers intended for the Emergency Message with “EMERGENCY ON” (See
STORING
NUMBERS IN THE
P
HONE BOOK
section).
Hold down the red pendant button or SOS BUTTON. The phone beeps for about 15 seconds then dials the
first emergency number automatically. The phone will announce your recording.
To deactivate the SOS call simply press and hold the red pendant button for about 5 seconds.
The maximum operating range of the REMOTE PENDANT is about 100 feet.
IMPORTANT NOTES
You can use your REMOTE PENDANT to answer a call. When the phone rings simply tap the red REMOTE
PENDANT TRANSMIT BUTTON, the call will be answered and you will be able to talk using the
speakerphone. To disconnect the call simply press the red button again. Be careful not to hold the button for
too long (about 2.5 seconds) or you will activate the emergency call program. If there is no response from the
first emergency call, or if the first caller does not press the numbers 1 and 2 sequentially to cancel the SOS
function, the phone will disconnect and dial the next Emergency Number automatically.
If you do not record your own Emergency Message, the phone will announce the default emergency
message when you press S
O
S BUTTON or the red REMOTE PENDANT TRANSMIT BUTTON.
If the emergency calls receive no response, the phone will automatically redial the numbers on the
Emergency Number list 10 minutes later.
Содержание SFA3800
Страница 20: ...E 19...
