First Alert P-510, Руководство пользователя

Страница: 9 / 12

Setting Up the P-520 Camera
Model P-520 User's Manual
Rev 0

May 2010
5
C
ONNECTING THE
C
AMERA TO A
VCR/DVR
AND
TV
1
Connect the 100 ft AV cable (supplied) to the camera.
2
Connect other end of the AV cable to the input on the VCR/DVR.
(yellow connector = video in; white connector = audio in)
3
Connect a AV cable (not supplied) from the VCR/DVR to the TV.
4
Connect the power supply cable (supplied) to the camera (red plug). Plug the
adapter into an electric outlet.
Make sure the power adapter is in a dry place.
5
Power on the VCR/DVR and TV.
6
Tune your TV to the correct INPUT (e.g., INPUT1) using your TV’s remote control,
Follow your manufacturer’s instructions to record to your VCR or DVR.
N
IGHT
V
ISION
The camera(s) has built-in infrared LEDs to allow you to view up to a distance of 10 ft at
night for 24-hour surveillance. The LEDs automatically activate at night and the picture
viewed turns to a black and white image.
T
ROUBLESHOOTING
Problem Solution
No picture.
Make sure the camera and TV are plugged in.
Make sure the TV/ VCR/ DVR is tuned to the correct input
channel.
Flickering image.
Move the camera or move any source of bright light away
from the camera.
Image is too light or dark.
Adjust the contrast and brightness on the TV.
Move the camera or move any source of bright light away
from the camera.
A white image appears at
night.
The camera's infrared LEDs shine invisible light that
reflects off surfaces such as glass causing white light.
Place the camera on the other side of windows or place
the lens flush against the surface to improve night vision.