First Alert FAS-124, Руководство пользователя

Страница: 7 / 8

5
Care and Maintenance
To keep your Camera and Monitor Security System operating properly you must:
• Keep your monitor and camera dry. Moisture can damage the units. If the monitor or
camera does get wet, immediately unplug the AC adapter from the wall outlet. Press
the power switch on the monitor to OFF. Make sure the monitor or camera is thor-
oughly dry before you reconnect the AC adapter back into the wall outlet and
restore the power.
• Locate or store the monitor and camera in a normal temperature environment.
Extreme temperatures can shorten the life of electronic devices.
• Handle the monitor and camera carefully when moving or storing them. Dropping or
shaking can seriously damage the units.
• Occasionally wipe the camera and monitor with a damp cloth to remove dust
and dirt.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the monitor and camera. Use of these products can damage the units.
• Do not locate the monitor and camera in dirty, dusty, or greasy areas. Dirt and dust
can get inside the units and cause premature wear.
We are confident you will enjoy your new First Alert® Home Security System. If you have
any questions that cannot be answered by reading this manual, please contact our
Consumer Affairs Department at (800) 226-9671.
Troubleshooting
Try using this troubleshooting guide before calling for service. Perform the checks
described below.
If you are still having problems, contact the Consumer Affairs Division at
1-800-226-9671, 9:30 AM to 5:00 PM, Eastern Standa rd Time, Monday through Friday.
Problem... You Should...
Shrinking picture Check the condition of the power source on
the monitor.
Multiple image in picture Adjust the Vertical Hold knob on the monitor.
Picture is too dark or too light Adjust the Contrast or Brightness knob on
the monitor.
Picture rolls up or down Adjust the Vertical Hold knob
on the monitor.
Picture, but no sound Adjust the Volume knob on the monitor.
Sound, but no picture Adjust the Contrast or Brightness knob on
the monitor
Poor picture quality 1. Clean the camera lens.
2. Adjust the Contrast or Brightness knob
on the monitor.
No power Check the AC adapter connection at the
wall outlet.