First Alert FA848C, Инструкция по установке и настройке

Страница: 45 / 96

Q 17, L3
Enter the L3 digit for the desired options from the table below.
L3
Entry
Euro Pulse
Dialing
TouchTone
Dialing
U.S. Pulse
Dialing
User Codes
4-digit 6-digit
Bell
Supervision
0 ✔ ✔
1 ✔ ✔
2 ✔ ✔
4 ✔ ✔
5 ✔ ✔
6 ✔ ✔
8
✔ ✔ ✔
9
✔ ✔ ✔
A
✔ ✔ ✔
C
✔ ✔ ✔
D
✔ ✔ ✔
E
✔ ✔ ✔
Dialing Method: Select the type of dialing desired.
User Codes 4/6 Digits: The system supports either 4-digit or 6-digit user codes. If this
option is selected, the system is set to use 6-digit codes. Existing 4-digit user codes will be
automatically changed to include “00” before the existing code (e.g., 1234 becomes 001234).
If the system is set to 6-digit codes and is changed to 4-digit codes, the system automatically
deletes the first two digits of existing 6-digit user codes (e.g., 123456 becomes 3456).
Bell Supervision – Select this option to comply with NFPA 72 requirements. If selected,
the bell will be supervised for an open circuit across the bell output terminals. If a fault is
detected, the keypad will display a fire trouble condition.
Q 17, L4 Enter the L4 digit for the desired options from the table below.
L4
Entry
Send Test
Report at
Fixed
Interval
Don’t Send
Test Report
if Event
Occurs
Test Time Interval
dis Every 1 7 27 60 90 180
hour day days days days days days
0
✔
1 ✔ ✔
2 ✔ ✔
3 ✔ ✔
4 ✔ ✔
5 ✔ ✔
6 ✔ ✔
7 ✔ ✔
9 ✔ ✔
A ✔ ✔
B ✔ ✔
C ✔ ✔
D ✔ ✔
E
✔ ✔
Send Test Report at Fixed Interval: Test reports will be sent at the time interval
selected. See Question 27 to set the time of day for the test report transmission.
Don’t Send Test Report if Event Occurs: Test reports will be sent at the time interval
selected unless an event that caused a dialer report occurred before the time interval
expired. In this case, no test report is sent. This cuts down the communication traffic to the
central station.
Test Time Interval: Select the test reporting time interval. Enter 0 to disable test
reporting.
6-13