PC Software Connectivity
(LAN) Local Viewing Setup (From PC)
(PC must be connected to the same local network as the Camera)
1.
Follow Steps 1-3 in “Initial Camera Installation” Instructions.
2.
On your PC, Insert the installation disk that came with your camera (or visit www.firstalert.com) and
install the camera remote viewing software.
3.
Double click the software icon on your desktop.
4.
Your camera ID number should be listed in the LAN task pane in the upper right.
5.
Double click the Exxxxx camera and you should be connected to your camera on a local network.
Wireless Connectivity (From PC)
6.
Follow steps 1-4 in Option B.
7.
Right click on the Camera ID in the task pane.
8.
Select “Set WIFI Connection”
9.
Check the “start WIFI setting” box
10.
Click “Scan”
11.
Select your Wireless network name from the Network Name (SSID) dropdown menu
12.
Enter your Wireless Network Password in the Password field
13.
Select OK
14.
Unplug the Ethernet Cable from the router and the camera
15.
Please allow 2 minutes for the camera to reboot
(WAN) Remote Viewing Setup (From PC)
1.
Follow steps 1-4 in Option B.
2.
Select the WAN tab.
3.
In the software, click register to create a username and password.
(Do not lose this information)
4.
Once a username and Password is created, login into the software.
(Tip: Select the WAN tab on the upper right)
5.
Right click anywhere in the software task pane on the right and select “add device”.
6.
Enter the device information for the camera.
(Tip: Device information is on a label on the bottom of the camera.)
DO NOT LOSE THIS INFORMATION.
7.
Once the camera is added to the task pane under WAN, you will now be able to log off the local
internet on your PC and connect to another remote internet source.
8.
Once connected to a different internet source than the Open the PC software, select the WAN tab,
and log into your account. You will see the added camera under WAN.
OPTION
B
© 2014 BRK Brands, Inc. All rights reserved. To download the full manual please visit www.firstalert.com. M08-0489-003
