Installing the Camera and DVR
Model A-575 User's Manual
D
EVICE
O
PERATING
R
ANGE
This wireless camera is capable of transmitting up to 330 ft in open field conditions.
However, when installed around your property, any solid objects (e.g., walls, ceiling,
reinforced PVC doors, etc.) placed between the camera and receiver will reduce the range. For
best transmission, avoid installations where there are very thick walls or major obstructions
between the wireless camera and receiver. Avoid installing the camera or receiver next to a
metal radiator, wireless router, or microwave oven.
If this camera is used with a digital video recorder (DVR) to record or view video on a TV,
ensure the signal reception is the best possible reception (i.e., no interference lines on the
TV). If necessary, reduce the distance between the camera and receiver. Eliminating
interference is important when the DVR is set to motion record. You may find that if the
wireless camera is installed outside, the maximum operating range without interference may
be less than 50 ft.
C
ONNECTING THE
W
IRELESS
C
AMERA
1
Select the position for your camera. Secure the camera bracket.
Screws and anchors are supplied. Use an appropriate screw type for the
mounting surface.
2
Loose the T-bolt. Mount the camera.
3
Make sure the lens is upright relative to your subject (antenna should be
relatively upright).
4
Connect the camera to power using the supplied power cable and adapter.
The power adapter and cables are not weather resistant, and need to be sheltered
from moisture, rain, and sunlight.
5
Lift the small tab on the side of the camera power cable. Locate the two dip
switches located underneath the tab.
5
T-bolt
camera stand
and bracket
